Bamboo Imitation Lightweight Honeycomb Panels For Furniture RHS / C Channel Sealed

Bamboo Imitation Aluminium Honeycomb Panel for Furniture with RHS or C Channel Sealed
 
Product Description
 
Bamboo Imitation Aluminium Honeycomb Panel for Furniture with RHS or C Channel Sealed is an aluminum honeycomb panel with a surface pattern of bamboo. With the edge sealed with rectangular hollow section also called C channel, the panel can be used on the integrated furniture especially on the cabinet. For some special areas, the designers or manufacturers want to get a real bamboo quality appearance but the real bamboo material is easy to cause fungi or chapped if the moisture content of the air changes. Therefore, the bamboo imitation aluminum honeycomb panel is produced by Pasia to meet the furniture industry on the above mentioned requirement. The bamboo veneer bonded with the aluminum honeycomb panel is with a light weight and high strength. It cannot be easily damaged by outside shock because of the aluminum honeycomb backing can absorb most of the energy from outside so that the leftover for the bamboo veneer is very limited. This structure makes the bamboo veneer aluminum honeycomb panel a longer life time.

General Description

Aluminum honeycomb panel is a bonded sandwich structure system of two surface aluminium plates and one honeycomb cores with a special purpose adhesive. Industrial used aluminium honeycomb panel will add some more processes such as surface treatment, edging, embedding, carving and so on to make the panel suitable for special conditions. It has been widely used by the industries of civil construction, transportation, exhibition, signage, elevator, clean room etc. The honeycomb technology is from aerospace technology. The whole production process is finished in the modern factory, using hot pressing or vacuum pressing technology. Due to the high thermal conductivity between the aluminum plates and honeycomb, it is synchronized the thermal expansion and contraction of the inside and outside aluminium material. There are small holes on the honeycomb core foil wall so that the air is free of flowing inside the panel box. Furthermore, sliding mounting buckle system does not cause structural deformation during thermal expansion and contraction.

Features

The center material is aluminum hexagonal honeycomb with a small density (about 3 to 7 kg per square meter), about 1/5 of the weight of wood with the same area and thickness, 1/6 of the glass, 1/7 of solid aluminium, which greatly reduced the building load and construction cost. Thanks to the air contained in the core, the panel can be sound and thermal insulated. Because of no combustible material contained, the fire rating can be at least B1 level. The panel performs well also on waterproof, moisture-proof, no harmful gas release, with a high unit mass of the specific strength and stiffness, not easy to deformation, completely overcoming the collapse and deformation in the center area if with large panel. The panel edge can be cut depending on real conditions. The PVDF coating can guarantee the product life more than 30 years.

After surface treated with corrosion resistant fluorocarbon resin, it can be widely used on curtain wall, roof, large façade, signs and interior decoration. The front plate of the aluminum honeycomb panel is painted with E. C. C. A. quality standards PVDF fluorocarbon paint with ordinary color or metallic color, so the surface has excellent weather resistance.

In case of heavy rain, there is particularly large noise when the raindrops hit the aluminum veneer or aluminum-plastic panel, while honeycomb panel can avoid this situation. Aluminum honeycomb panels are generally made of fluorocarbon coated aluminum plates. The continuous roller coating with PVDF material is the most important point to avoid color difference and flat coating film. Based on this, it can keep the exterior building with bright color for long time.

Mechanical Properties

Application:

Panel type furniture applications.